4.3.2 Audible alarms
Alarm activation and beep pattern are configurable by user with Dosimeter Configuration Tool.
The items that can be set are as follows:
(1) Operation timing of LED, Vibrator and Buzzer
Operating timing setting is selectable from the following 6 patterns for each alarm type, but pattern No.6
can be selected by “Low battery voltage” only.
[Pattern No.1] … When alarm is generated, the operating timing is showed below.
[Pattern No.2] … When alarm is generated, the operating timing is showed below.
[Pattern No.3] … When alarm is generated, the operating timing is showed below.
[Pattern No.4] … When alarm is generated, the operating timing is showed below.
To Next Page
Loading...
