5.2 Clip replacement
Follow these steps to replace the clip:
[Removal of the clip]
(1) Pull the clip hook.
(2) Pull the clip down keeping the clip hook
away from NRF51.
[Mounting of the clip]
(1) Push the clip up until the clip hook
closely inserted to NRF51.
5.3 USB connector cap replacement
Follow these steps to replace the USB connector cap:
[Removal of the USB connector cap]
(1) Open the USB connector cap.
(2) Turn a screw down with a Phillips-head
screwdriver and take off the USB
connector cap.
[The way of put on the USB connector cap]
(1) Put on the USB connector cap and turn
a screw up with a Phillips-head.
(2) Close the USB connector cap.
To Next Page
Loading...
