Need help?Do you have a question about the Fuji Electric ZKJ Series and is the answer not in the manual?
General| Input Type | Thermocouple, RTD, DC Voltage, DC Current |
|---|---|
| Control Output | Relay, Current |
| Alarm Output | Relay contact |
| Communication | RS-485 (optional) |
| Power Supply | 100-240V AC, 24V DC |
| Display | LED |
| Mounting | Panel mounting |
| Dimensions | 96x96mm, 48x96mm, 72x72mm |
| Measurement Range | Depends on sensor type |
| Output Signal | 4-20mA |
| Sensor Type | Thermocouple, RTD |
| Operating Humidity | 35 to 85% RH (non-condensing) |
To Next Page
