Fuji Electric NRF51 - Normal Operation Display Modes

TN5A4215b 35/58
6.2 During use (Normal operation)
LCD display change flows by operation of button are as follows:
*If either of the operation buttons was pressed when LCD backlight is turned off, LCD backlight would be
turned on. Then, LCD display will be changed as the following table shows.
No.
Display
Remarks
1
[Basic display]
 To No.2
[Information display] Short press of “◎”
 To No.3
[Configuration/Accessory display] Short press of “◎”
 To No.4
[Operating time display] Short press of “◎”
 To No.8
Short pressing of ”◎”
Power turns off by long
press of “◎” button. (In
Basic display or
Information display)
Indication is changed by
short press of “△” or “▽”
button in each display.
See the following pages
for detailed flow.