Fuji Electric NRF51 - Dose (rate) Alarm Settings

TN5A4215b 16/58
Initial settings of alarm operation for each alarm type are as follows:
1. Dose (rate) alarm
Alarm type
Initial setting of alarm operation
Accumulated
dose alarm
(1) Operation timing
[Pattern No.3]
(2) Buzzer frequency
(3) Buzzer sound
(4) Backlight
(5) Sounding time
[High]
[ON]
[RED]
[Continuous]
(6) Mute
(7) Vibrator
(8) Flash LED
(9) Latch
[Not available]
[ON]
[ON]
N/A
(10) LCD indication sample
Accumulated dose alarm Overload
Accumulated
Dose warning
(1) Operation timing
[Pattern No.3]
(2) Buzzer frequency
(3) Buzzer sound
(4) Backlight
(5) Sounding time
[High]
[ON]
[YELLOW]
[Continuous]
(6) Mute
(7) Vibrator
(8) Flash LED
(9) Latch
[Not available]
[ON]
[ON]
N/A
(10) LCD indication sample
Accumulated dose warning
.