Fuji Electric NRF51 - Page 22

TN5A4215b 22/58
5. Call button action
Alarm type
Initial setting of alarm operation
Emergency alarm
(1) Operation timing
[Pattern No.5]
(2) Buzzer frequency
(3) Buzzer sound
(4) Backlight
(5) Sounding time
[High]
[ON]
[RED]
[Continuous]
(6) Mute
(7) Vibrator
(8) Flash LED
(9) Latch
[Not available]
[ON]
[ON]
N/A
(10) LCD indication sample
Emergency alarm
*Operation by pressing call button is selectable from the following four settings by user with Dosimeter
Configuration Tool.
[Emergency alarm] … When call button is pressed, the above alarm operation generates and
emergency data is delivered to upper management system if radio telemetry setting is “ON”.
[Support assist] … When call button is pressed, the above alarm operation generates (the same as
“Emergency alarm”). Emergency data is not delivered to upper management system if radio telemetry
setting is “ON”.
[Test] … When call button is pressed, test sequence for display, LED, vibrator and buzzer is performed
in the same way as startup
[OFF] … When call button is pressed, nothing happens.