Fuji Electric NRF51 - Page 41

TN5A4215b 41/58
No.
Display
Remarks
5
[Parameter configuration display] Switching (continued)
from the previous page
Short press of “▽”
Short press of “▽” Short press of “△”
Short press of “▽” Short press of “△”
Short press of “▽” Short press of “△”
0
Short press of “△”
Short press of “◎” to
change a displayed
parameter. (Yellow
backlight turns on)
Long press of “◎” to
confirm the parameter
change.
Calibration due date
setting can be set with
numbers 0 to 9.
Return to
Configuration/Accessory
display by short press
of ”◎”.
Calibration due date
setting (gamma)
End of configuration
 To No.4
Version viewing
(Only confirmation)
Calibration due date
setting (neutron)