14
Example) Altering alarm setpoint of heater burnout current of 9.0A to 8.0A
Key operation Description
Press the SEL key to display P.
Press the SEL key repeatedly until
is displayed.
Press the or key to display
8.0.
Press the DATA key once.
Current data of 9.0A is displayed.
Press the SV key when you need to
display the operation status display.
After pressing the ENT key, data of
8.0A is registred.
Operation is started with data of
8.0A.
Display
SEL
ENT
SV
DATA
SEL
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
