To Next PageTo Next Page
Need help?Do you have a question about the Fuji Electric PXZ Series and is the answer not in the manual?
General| Control Method | PID, ON/OFF |
|---|---|
| Input Type | Thermocouple, RTD |
| Output Type | Relay, Current |
| Power Supply | 100 to 240 VAC, 24 VAC/VDC |
| Display | LED |
| Alarm Output | Relay |
| Communication | RS-485, Modbus RTU |
| Control Output | Relay |
| Mounting | Panel mounting |
| Dimensions | 48 x 96 mm |
| Number of Control Outputs | Up to 2 |
| Ambient Operating Humidity | 35% to 85% RH (non-condensing) |
Essential safety guidelines for using the equipment.
Instructions for proper installation, wiring, and maintenance.
Advice on avoiding unsuitable installation locations and conditions.
Verifying the correct model configuration and input type.
Details on physical installation and panel cutout dimensions.
Diagrams for connecting input and output signals for various models.
Overview of the controller's front panel components and their functions.
Procedures for setting the desired temperature (SV).
Guide to selecting sensor types and input ranges for accurate measurement.
Choosing between ON/OFF, PID, and Fuzzy control modes.
Configuration and examples for ON/OFF control operation.
Procedures for starting and using the auto-tuning feature.
Using bAL and Ar for overshoot suppression.
Explanation of No. 1 and No. 2 block parameters and their functions.
Guide to navigating and operating the controller's interface.
Setting proportional band, integral time, and derivative time.
Configuring alarm types, hysteresis, and output limiter modes.
Utilizing fuzzy control, ramp/soak, and compensation.
Identifying and resolving common error displays and abnormalities.
Technical details, power requirements, and operating conditions.
Identifying causes and remedies for common operational problems.
