Fuji Electric PXZ Series - Initial Setup and Basic Operation

— 6 —
For normal usage
<Reference items>
<Description>
Error indication
6
Turning power on
Wiring
3
Usages
4
Better usages
5
Operation
Installation/mounting
2
Confirming type identification
1
• Confirming that product delivered
matches with the ordered one
• Outline dimension
• Panel cutout dimension
• Mounting method on the panel
• Changing temperature set value
• Basic operation method
• List of parameters
• List of input/output/alarm codes
• Setting of input/output ranges
• Selection of control method
• Automatic setting of control
parameters by auto-tuning
* Wait for about 30 minutes until the controller stabilizes
thermally: the operation e.g. measurement should be started
30 minutes after the power is turned on.
• Terminal connection diagram
• Error indication
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com