EasyManuals Logo

Fuji Xerox ApeosPort-IV 3070 Administrator's Manual

Fuji Xerox ApeosPort-IV 3070
675 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #500 background imageLoading...
Page #500 background image
15 Problem Solving
500
Problem Solving
15
027-775
[Cause] Too many destination addresses have been specified.
[Remedy] Reduce the number of destination addresses. If the error still is not
resolved, confirm with your network administrator whether the SMTP
server supports the EHLO command.
027-776
[Cause] An error occurred during communication with the SMTP server.
[Remedy] Use ASCII characters to modify the host name that has been specified
under [Tools] > [Connectivity & Network Setup] > [Machine's E-mail
Address/Host Name]. If the error still is not resolved, confirm with your
network administrator whether the SMTP server supports the EHLO
command.
027-777
[Cause] The destination SMTP server does not support SMTP-AUTH.
[Remedy] Set [E-mail Send Authentication] to [Off] under [Tools] > [Connectivity &
Network Setup] > [Outgoing/Incoming E-mail Settings] > [SMTP Server
Settings].
027-778
[Cause] The destination SMTP server does not support the SMTP-AUTH system
set on the machine.
[Remedy] Confirm the authentication type supported by the SMTP server with your
network administrator. The machine supports the following
authentication types: PLAIN (plain text) authentication, LOGIN
(BASE64) authentication, and CRAM-MD5 (challenge-response).
027-779
[Cause] Failed to authenticate the SMTP server.
[Remedy] Confirm the login name and password set to SMTP-AUTH.
027-796
[Cause] The received e-mail was discarded because no documents were
attached to it. (The machine is set to print attached documents only.)
[Remedy] To print the mail body or header information also, change settings in the
[Properties] screen of CentreWare Internet Services.
Refer to "12 Computer Operations" > "E-mail Printing" in the User Guide.
027-797
[Cause] The output destination of the received e-mail is invalid.
[Remedy] Specify a correct output destination, and send the e-mail again.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.

Table of Contents

Other manuals for Fuji Xerox ApeosPort-IV 3070

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-IV 3070 and is the answer not in the manual?

Fuji Xerox ApeosPort-IV 3070 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-IV 3070
CategoryCopier
LanguageEnglish

Related product manuals