Copy
91
Copy
3
îš„ Auto %
Automatically determines the copy ratio based on the document size and the paper size
specified in [Paper Supply], and copies the document to fit into the paper.
Note • If you select [Auto %], select an option other than [Auto Select] in [Paper Supply].
îš„ Ratios (3rd to 4th buttons on the screen)
Displays preset copy ratios.
You can change the copy ratio associated with each button. For information on the settings, refer to "5 Tools" > "Copy
Service Settings" > "Preset Buttons" > "Reduce/Enlarge - Button" in the Administrator Guide.
îš„ More
Displays the [Reduce/Enlarge] screen on which you can set [Proportional %], [Independent
X - Y%], and [Calculator %].
For information on the settings on the [Reduce/Enlarge] screen, refer to "When [Proportional %] is Selected" (P.91), "When
[Independent X - Y%] is Selected" (P.92), or "When [Calculator %] is Selected" (P.93).
When [Proportional %] is Selected
You can select a ratio from the standard copy ratios, or can enter a ratio directly.
1 Select a copy ratio, or specify a value.
îš„ Variable %
Specify a ratio in the range from 25 to 400% in 1% increments. To specify a value, use the
numeric keypad or [+] and [-]. Specifying "100 %" allows you to make copies at the same
image size as the original document.
When you make enlarged/reduced copies from standard sized documents on standard sized
paper, the following copy ratios will be applied.
How to load a document depends on the size and orientation of a document. For more information, refer to "Step 1 Loading
Documents" (P.76).
For information on paper that can be loaded, refer to "2 Paper and Other Media" > "Paper Types" in the Administrator Guide.
Copy
/
Original
A6 B6 A5 B5 A4 B4 A3
A6 100% 122% 141% 173% 200% 245% 283%
B6 82% 100% 116% 142% 164% 200% 232%
A5 71% 86% 100% 122% 141% 174% 200%
B5 58% 70% 81% 100% 115% 141% 163%
A4 50% 61% 70% 86% 100% 122% 141%
B4 41% 50% 58% 70% 81% 100% 115%
A3 35% 43% 50% 61% 70% 86% 100%
To Next Page
Loading...
Need help?
General
