Replacing Waste Toner Container
1: Ensure machine has stop
printing / copying. Gently
open the front cover.
2: Open the Waste Toner
Container Cover.
3: Gently pull the container out.
Place used container into the
plastic bag provided. Remove
the new Waste Toner Container
from its packaging.
4: Install the new container and
close the Waste Toner Container
Cover & Front Cover
Replacing Consumables
NOTE: The machine will prompt a message when it is time to order a new container.
CAUTION: Do not use warm water or cleaning solvents to remove Toner (Dry Ink)
from your skin or clothing.
This will set the Toner and make it difficult to remove.
If any Toner gets on your skin or clothing, use a brush to remove the Toner, blow it
off, or wash it off with cold water and mild soap.
Do not attempt to use a standard shop vacuum or home vacuum to clean Toner
spills in or near the machine.
Shop and home vacuums are not equipped with correct filtration and will contaminate
your environment.
.
1
2
3
4
41
41
For used cartridges disposal/collection, please call us @ 1-300-88-1163.
To Next Page
Loading...
Need help?
General
