Paper Jams
619
Problem Solving
15
3 Return the lever 2a to the original position.
4 Close the finisher right cover.
Note • A message will be displayed and the machine will not operate if the front cover of the finisher is
even slightly open.
Paper Jams at the Lever 2b and the Knob 2c when D2 Folder Unit is Installed
1
Make sure that the machine has stopped
before opening the right cover of the finisher.
2 Move the levers 2b and turn the knob 3a to the
left. Remove the jammed paper.
Note • If paper is torn, check for any torn pieces of
paper inside the machine.
3 Return the lever 2b to the original position.
4 Close the finisher right cover.
Note • A message will be displayed and the machine will not operate if the front cover of the finisher is
even slightly open.
To Next Page
Loading...
