Output Format
151
Copy
3
Copies are also collated when originals are loaded on the document glass and any of the
following features is used: 2 Sided Book Copying, Covers, [Blank Separators & Handouts] or
[Transparency Set & Handouts] of Transparency Options, Booklet Creation, Stapling, Build
Job, Sample Set, and Combine Original Sets.
îš„ Collated
The machine outputs sheets sorted into sets that are arranged in page order.
îš„ Uncollated
The machine outputs the specified number of copies and sorts sheets by page.
îš„ Uncollated with Separators
The machine outputs copies with inserting blank sheets as a separator and sorts sheets by
page.
îš„ Separator Tray
When you select [Uncollated with Separators], select the paper tray to be used for the
separators.
When [Bypass] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5] Screen" (P.94).
îš„ Staple
Specify the position for stapling. The number of sheets that can be stapled is 2 - 50 sheets
(when 90 gsm paper is used).
For the stapling position, refer to "Paper Size and Stapling Position" (P.152).
For the paper type and the number of sheets that can be stapled, refer to "16 Appendix" > "The Paper Type and the Number
of Sheets That Can Be Stapled" in the Administrator Guide.
Important • Ensure that the actual orientation of the original document matches the [Original Orientation]
setting on the [Layout Adjustment] screen.
• In the following cases, the actual stapling position differs from the stapling position displayed on
the screen:
- When [Original Orientation] is set to [Upright Images], and [Staple] is set to one position at the
right side.
- When [Original Orientation] is set to [Sideways Images], and [Staple] is set to one position at the
left side.
îš„ Hole Punch
Sets the position for punching.
For the hole punching position, refer to "Paper Size and Punching Position" (P.154).
Important • Ensure that the actual orientation of the original document matches the [Original Orientation]
setting on the [Layout Adjustment] screen.
îš„ Original Orientation
Allows you to specify the orientation of the document so that the machine can identify the
top of the document.
Note • If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.
z
Upright Images
Select this option when placing the top edge of the document against the top side of the
document glass or document feeder.
z
Sideways Images
Select this option when placing the top edge of the document against the left side of the
document glass or document feeder. Always select [Sideways Images] when the top of
the document is placed facing the left side (horizontal text).
To Next Page
Loading...
Need help?
General
