Fuji Xerox Docu Centre -IV C2260

Documents can be printed into 2
Documents can be printed into 2
-
-
sided format with flip on Long or Short Edge, finished
sided format with flip on Long or Short Edge, finished
with stapled.
with stapled.
P3 & P4: Making a print job 2-sided (optional Finishing)
2 On the [Paper/Output] >
select [2-Sided Print]
- 2 Sided Print
- 2 Sided Flip on Short Edge
2 On the [Paper/Output] >
select [2-Sided Print]
- 2 Sided Print
- 2 Sided Flip on Short Edge
3 Select [Output Color]
Color / Black & White
3 Select [Output Color]
Color / Black & White
1 From application > Select
Printer > [Properties]
1 From application > Select
Printer > [Properties]
4 *Optional Feature
Select [Finishing] to set
Stapling.
Set required stapling position.
4 *Optional Feature
Select [Finishing] to set
Stapling.
Set required stapling position.
5 On the [Paper/Output] >
select [Paper] to specify
Paper Tray / Paper Size /
Paper Type if necessary.
5 On the [Paper/Output] >
select [Paper] to specify
Paper Tray / Paper Size /
Paper Type if necessary.
6 Click OK on all open
windows to print.
6 Click OK on all open
windows to print.
31
31