What to do if Fuji Xerox All in One Printer cannot store a document for secure polling?
If your Fuji Xerox All in One Printer cannot store a document for secure polling due to full memory, cancel the operation and try again later when additional memory is available.
How to fix Fuji Xerox Document Centre 336 All in One Printer that will not power on?
If your Fuji Xerox All in One Printer won't power on, try these steps: * Check the power cord. * Ensure the power switch is in the ON position. * Verify the RESET button on the back of the machine is not tripped (popped up); push it to reset. * Confirm the AC outlet is supplying voltage by connecting another appliance.
What to do if Fuji Xerox All in One Printer displays a memory full error message?
If your Fuji Xerox All in One Printer displays a memory full error message: * Check with the System Administrator about available memory. * Divide the remaining pages of the job into several small jobs and run the job again.
Why Fuji Xerox Document Centre 336 does not accept documents into memory?
If your Fuji Xerox All in One Printer does not accept documents into memory: * Check with the System Administrator about available memory. * If the memory is almost full, print and delete unnecessary files.
How to adjust the darkness of the print on Fuji Xerox Document Centre 336?
If the output from your Fuji Xerox All in One Printer is too light or too dark: * Load fresh paper. * Check the quality of the document. * Select [Lighten/Darken] on the touch screen. * Run off more prints until the copy quality improves. * Replace the drum cartridge.
How to improve light copies when scanning glossy documents on Fuji Xerox All in One Printer?
If you're getting light copies when scanning glossy, shiny, or coated documents through the document feeder on your Fuji Xerox All in One Printer, use the document glass instead of the document feeder.
How to reduce gloss variations (coining) with Fuji Xerox Document Centre 336 All in One Printer?
To reduce gloss variations (coining) with your Fuji Xerox All in One Printer: * Check the quality of the documents. * If the document has large areas of solid density, adjust the contrast.
How to prevent deformed transparencies when printing with Fuji Xerox All in One Printer?
To prevent deformed transparencies when printing with your Fuji Xerox All in One Printer: * Check that [Transparency] is selected in [Paper Type]. The machine automatically adjusts for different types of media. Transparencies tolerate less heat paper. * Use the side tray instead of the center output tray.
Why are characters missing from my Fuji Xerox Document Centre 336 All in One Printer output?
If characters are missing from your Fuji Xerox All in One Printer output: * Load fresh paper. * Reinstall the drum cartridge. * Replace the toner cartridge if the screen message for replacement is displayed.
Why are images blurred when printing from Fuji Xerox Document Centre 336?
If you are getting blurred images from your Fuji Xerox All in One Printer: * Load fresh paper. * Replace the drum cartridge. * Replace the toner cartridge if the screen message for replacement is displayed.
Basic steps for making copies, including loading documents and starting the job.
Basic procedure for sending faxes and iFaxes.
Basic procedures for scanning documents.
Basic procedure for creating and executing job flows.
Features available when printing from a PC.
Allows sending jobs for printing or creating/changing job templates.
View and set machine properties like configuration and settings.
Information on how to load paper into each type of tray.
Basic procedure for accessing and customizing system settings.
Configure machine settings common to main features.
Specifies how reports are to be automatically printed.
Initializes hard disk or deletes all document data.
Checks job progress and displays detailed information.
Manages print jobs that failed authentication.
Stores confidential documents for printing, requiring user ID and password.
Prints one set of a document before printing the whole quantity.
Views machine status and tray/hard disk status.
Changes default printer mode and emulation settings.
Sets the fax reception mode to Manual or Auto.
Views billing meter info and specifies report output.
Views toner usage and cartridge status.
Outputs a report of recent errors.
Overview of the Authentication feature and user types.
Explains functions restricted by the Authentication feature.
Operation via network using CentreWare Internet Services.
Explains restrictions for job flow sheets and mailboxes.
Procedures for cleaning machine components.
Steps to replace the drum cartridge.
Steps to replace the toner cartridge.
Steps to load a new staple case into the finisher.
Steps to identify and clear faults.
Instructions for clearing paper jams in various locations.
Suggestions for resolving difficulties based on symptoms.
Lists fault codes and their corresponding remedies.
Details hardware configuration, size, and weight.
Details capacity, weight, and sizes for paper trays.
General| Brand | Fuji Xerox |
|---|---|
| Model | Document Centre 336 series |
| Category | All in One Printer |
| Language | English |
To Next Page