What to do if Fuji Xerox All in One Printer cannot store a document for secure polling?
If your Fuji Xerox All in One Printer cannot store a document for secure polling due to full memory, cancel the operation and try again later when additional memory is available.
How to fix Fuji Xerox Document Centre 286 that will not power on?
If your Fuji Xerox All in One Printer won't power on, try these steps: * Check the power cord. * Ensure the power switch is in the ON position. * Verify the RESET button on the back of the machine is not tripped (popped up); push it to reset. * Confirm the AC outlet is supplying voltage by connecting another appliance.
What to do if Fuji Xerox All in One Printer displays a memory full error message?
If your Fuji Xerox All in One Printer displays a memory full error message: * Check with the System Administrator about available memory. * Divide the remaining pages of the job into several small jobs and run the job again.
Why Fuji Xerox Document Centre 286 All in One Printer does not accept documents into memory?
If your Fuji Xerox All in One Printer does not accept documents into memory: * Check with the System Administrator about available memory. * If the memory is almost full, print and delete unnecessary files.
How to adjust the darkness of the print on Fuji Xerox Document Centre 286?
If the output from your Fuji Xerox All in One Printer is too light or too dark: * Load fresh paper. * Check the quality of the document. * Select [Lighten/Darken] on the touch screen. * Run off more prints until the copy quality improves. * Replace the drum cartridge.
How to improve light copies when scanning glossy documents on Fuji Xerox Document Centre 286?
If you're getting light copies when scanning glossy, shiny, or coated documents through the document feeder on your Fuji Xerox All in One Printer, use the document glass instead of the document feeder.
How to reduce gloss variations (coining) with Fuji Xerox Document Centre 286?
To reduce gloss variations (coining) with your Fuji Xerox All in One Printer: * Check the quality of the documents. * If the document has large areas of solid density, adjust the contrast.
How to prevent deformed transparencies when printing with Fuji Xerox All in One Printer?
To prevent deformed transparencies when printing with your Fuji Xerox All in One Printer: * Check that [Transparency] is selected in [Paper Type]. The machine automatically adjusts for different types of media. Transparencies tolerate less heat paper. * Use the side tray instead of the center output tray.
Why are characters missing from my Fuji Xerox Document Centre 286 All in One Printer output?
If characters are missing from your Fuji Xerox All in One Printer output: * Load fresh paper. * Reinstall the drum cartridge. * Replace the toner cartridge if the screen message for replacement is displayed.
Why are images blurred when printing from Fuji Xerox Document Centre 286 All in One Printer?
If you are getting blurred images from your Fuji Xerox All in One Printer: * Load fresh paper. * Replace the drum cartridge. * Replace the toner cartridge if the screen message for replacement is displayed.
Important safety instructions for operating the Fuji Xerox equipment safely.
Description of machine features and available services via the <All Services> screen.
Procedure for powering the machine on and off, including safety information.
Basic steps for making copies, including loading documents and starting the job.
Description of basic features for a copy job on the [Basic Copying] screen.
Basic procedure for sending faxes and iFaxes, including loading documents.
How to specify destinations using features like Address Book and Speed Dial.
Basic scanning procedures including loading documents and saving data.
Scanning documents to send as e-mail attachments.
Basic procedure for using a Job Flow created on a network computer.
Steps to select and execute a job number for stored operations.
Procedure for changing machine defaults and configuring settings.
Changing default settings for network configuration.
Restrictions for job flow sheets and mailboxes when Authentication is enabled.
Step-by-step guide for removing and inserting the drum cartridge.
Step-by-step guide for removing and inserting the toner cartridge.
Ways to identify fault types and apply appropriate solutions.
General| Brand | Fuji Xerox |
|---|---|
| Model | Document Centre 286 series |
| Category | All in One Printer |
| Language | English |
To Next Page