Fuji Xerox Document Centre 286 series User Manual

Print Mode Settings
205
Remote Server Realm Name
Allows you to enter the KDC realm name within a maximum of 64 characters.
Other Settings
This feature allows you to select the e-mail receiving protocol from either SMTP or
POP3.
1. Select [Other Settings] on the
[Network Settings] screen.
2. Perform the necessary
operations.
3. Select [Close].
E-mail Receive Protocol
Allows you to select the protocol for receiving e-mail.
Print Mode Settings
This screen allows you to change the default settings for the printer configuration. For
more information, refer to the following.
NOTE: System Administrator access is required for this feature.
Allocate Memory – page 205
Other Settings – page 208
1. Select [Print Mode Settings] on
the [System Settings] screen.
2. Select the required option.
3. Select [Close].
Allocate Memory
Use this feature to specify memory capacities required for printing and for the receive
buffer for each interface.
1. Select [Allocate Memory] on the
[Print Mode Settings] screen.
2. Use the scroll buttons to switch
between screens.
3. Perform the necessary
operations.
4. Select [Close].

Fuji Xerox Document Centre 286 series Specifications

General

Brand	Fuji Xerox
Model	Document Centre 286 series
Category	All in One Printer
Language	English