Fuji Xerox Document Centre 286 series User Manual

12 Setups
200
Port9100
Use this feature to specify whether to enable the Port9100 port.
SNMP
Use this feature to specify whether to enable the SNMP agent.
FTP Client
Use this feature to specify whether to enable the FTP Client port. This setting item is
available only when the hard disk is installed on the machine.
Receive E-mail
Use this feature to specify whether to enable the mail receiving port.
Send E-mail
Use this feature to specify whether to enable the mail transmission port.
Mail Notice Service
Use this feature to specify whether to enable the mail notification service.
UPnP Discovery
Use this feature to specify whether to enable the UPnP port.
Internet Services (HTTP)
Use this feature to specify whether to enable the Internet Services port.
Port Status
Specify whether to enable the Internet Services port.
Internet Services Port Number
Specify the port number for Internet services from 0, 80, or any port from 8000 to 9999.
Protocol Settings
This feature allows you to configure the machine settings that correspond with the
protocol being used.
1. Select [Protocol Settings] on the
[Network Settings] screen.
2. Perform the necessary
operations.
3. Select [Close].
Ethernet Setting
Specify the Ethernet port speed according to the network environment to which the
machine is connected.

Fuji Xerox Document Centre 286 series Specifications

General

Brand	Fuji Xerox
Model	Document Centre 286 series
Category	All in One Printer
Language	English