3 Copy
58
Variable Shift
Moves images by specified amounts on the paper. You can specify up to 50 mm for
both dimensions using the scroll buttons.
Independent Shift
Allows you to make settings for Side 2 independently from the settings for Side 1.
Mirror Shift
Automatically places the image on the Side 2 page, matching the position of the image
on the Side 1 page.
Image Rotation
This feature allows you to automatically rotate the image to match the orientation of the
paper in the tray.
1. Select [Image Rotation] on the
[Scan Options] screen.
2. Select the required option.
3. Select [Save].
Off
Disables the feature.
Always On
Rotates an image every time.
On during Auto
Rotates an image only when selecting [Auto] in the [Paper Supply] or [Reduce/Enlarge]
features.
Rotation Direction
Displays the [Image Rotation - Rotation Direction] screen.
[Image Rotation - Rotation Direction] Screen
Use this screen to determine the edge of the copy paper where the top of the document
image is aligned when documents are of mixed orientation. The following options are
available:
• Staple Position - Rotates the image depending on the staple position. This option is
available only when the finisher is installed to on the machine.
To Next Page
Loading...
Need help?
General
