Login Setup/Auditron Administration
243
User Details Setup
Use this feature to configure the settings for user ID authentication.
1. Select [User Details Setup] on
the [Login Setup/Auditron
Administration] screen.
2. Perform the necessary
operations.
3. Select [Save].
User ID Characters
Displays the screen keyboard. Enter a name to be displayed on the touch screen, the
browsing screen of the CentreWare Internet Services, or printed on reports, instead of
a user ID. This name can be up to 15 characters long.
Hide User ID
Specify whether a user ID is to be displayed or hidden when it is entered.
Failed Access Log
Displays the [Failed Access Log] screen.
[Failed Access Log] Screen
With this feature enabled, the machine records an error when the number of
authentication failures exceeds the selected number within a certain period.
1. Select [Failed Access Log] on
the [User Details Setup] screen.
2. Select [On] to enable the
feature.
Failed Attempts
Use the numeric keypad on the control panel to select the maximum number of
authentication failures to be allowed.
Charge Print Settings
This feature allows you to specify how to treat the print jobs that are received when the
machine is in the Auditron Administration mode.
1. Select [Charge Print Settings]
on the [Login Setup/Auditron
Administration] screen.
2. Perform the necessary
operations.
3. Select [Close].
To Next Page
Loading...
Need help?
General
