18 Appendix
332
PCL Emulation
The following table shows the emulation parameters and their values for PCL
emulation. For information on how to change parameter values, refer to PCL Emulation
in the Machine Status chapter on page 257.
Decomposer 408 0 (Default): PDFBridge
1: PostScript
Selects the decomposer.
Password – Enter a password up to 32 characters.
Parameter Item No. Value
Parameter
Item No.
Value
Paper Tray 201 0 (Default): Auto
1: Tray 1
2: Tray 2
3: Tray 3
4: Tray 4
5: Tray 5 (Bypass)
Selects the paper tray. When [Auto] is selected, the machine automatically
selects the tray that contains the paper whose size is specified on the [Paper
Supply] screen.
Auto Size 202 3: A3
4 (Default*): A4
5: A5
14: B4
15: B5
21: 8.5 × 14”
22: 8.5 × 13”
23 (Default*): 8.5 × 11”
24: 11 × 17”
30: 8K
Sets the default paper size when the machine is set to select the paper size
automatically. Only available when [Paper Tray] is set to [Auto].
* The default value will be either [4] or [23] depending on the region of use.
Bypass
Size
203 3: A3
4 (Default*): A4
5: A5
14: B4
15: B5
21: 8.5 × 14”
22: 8.5 × 13”
23 (Default*): 8.5 × 11”
24: 11 × 17”
Sets the paper size for the bypass tray. Only available when [Paper Tray] is
set to [Tray 5 (Bypass)].
* The default value will be either [4] or [23] depending on the region of use.
To Next Page
Loading...
Need help?
General
