10 CentreWare Internet Services
148
Status
This page allows you to check the status of the paper trays, output trays, and
consumables of the machine. The details displayed may differ from those shown on the
touch screen of the machine.
Follow the steps below to select features available on the [Status] tab.
1. Click [Status] on the Main Panel on the home page.
2. Click the required feature on the collapsible menu of the Menu Panel.
General
This page displays the machine information and status. It also displays the [Refresh
Status] and [Reboot] buttons. Click the [Refresh Status] button to display the latest
information.
Trays
This page displays the status of the paper tray and output tray.
Paper Tray
Trays
Lists the available paper trays, namely Tray 1, Tray 2, Tray 3 (optional), Tray 4
(optional), and Tray 5 (Bypass).
NOTE: Trays displayed will depend on the configuration.
Status
Displays the status of the paper tray as [Ready], [Empty], [Not Available], or [Unknown].
NOTE: The status of the paper tray may be displayed as [Unknown] if the machine is
in the power saver mode.
Paper Remaining
Displays the percentage of paper remaining in each tray in 25% increments.
Paper Size
Displays the size of paper loaded in each tray.
Paper Type
Displays the type of paper loaded in each tray.
Priority
Displays the priority set for each tray when Auto Tray Switching is selected. The highest
priority is number 1. The greater the number, the lower the priority.
To Next Page
Loading...
Need help?
General
