Send Options - Fax/iFax
91
[Comment 1] Screen
1. Select [On] on the [iFax
Comment] screen.
2. Select [Comment 1].
3. Select [On] on the [Comment 1]
screen.
4. Select a comment from the
comment list using the scroll buttons.
5. Select [Save].
Off
Disables the feature.
On
Adds the selected [Comment 1].
No. Comment
Allows you to select a comment from the list of comments already registered.
For information on how to register comments, refer to Comments in the Setups
chapter on page 238.
[Comment 2] Screen
The procedures are the same as the [Comment 1] screen.
Transmission Report/Read Receipts (MDN)/Delivery Receipts (DSN)
These features allow you to print the transmission results report, and/or receive a
notification e-mail that the iFax you sent has been opened by the recipient (MDN) or
delivered to the destination (DSN). Whether to use [Read Receipts (MDN)] or [Delivery
Receipts (DSN)] can be selected on the [iFax Control] screen in the [Fax Mode Setting].
For more information, refer to Other Settings in the Setups chapter on page 226.
[Transmission Report] is used for regular faxes, and [Read Receipts (MDN)] and
[Delivery Receipts (DSN)] are used for iFax if the remote machine supports these
features.
1. Select [Report/Read Receipts]
or [Report/Delivery Receipts] on
the [Send Options] screen.
2. Select the required option.
3. Select [Save].
Transmission Report
• Off – Disables the feature.
• On – Outputs the result after the transmission is completed.
To Next Page
Loading...
Need help?
General
