Fuji Xerox Document Centre 286 series User Manual

System Administrator Settings
239
System Administrator Settings
This feature allows you to customize many settings on the machine to suit your
particular requirements. The machine enters the System Administrator mode only
when a correct System Administrator ID is entered. Before shipment, The default user
ID is set to “11111”. The [System Administrator Settings] screen allows you to start
procedures for changing the default System Administrator Login ID. For more
information, refer to the following.
System Administrator Login ID – page 239
System Administrator Password – page 239
Maximum Login Attempts – page 240
1. Select [System Administrator
Settings] on the [System
Settings] screen.
2. Select the required option.
3. Select [Close].
System Administrator Login ID
Use this feature to change the default System Administrator Login ID. Program a new
ID between 1 and 32 alphanumeric characters.
1. Select [System Administrator
Login ID] on the [System
Administrator Settings] screen.
2. Select [On].
3. Enter a new System
Administrator ID.
Use the numeric keypad on the control panel or select [Keyboard] to display the screen
keyboard.
4. Select [Next].
5. Enter the same System Administrator Login ID as you entered in step 3.
6. Select [Save].
System Administrator Password
Use this feature to change the default System Administrator Password. Program a new
password between 4 and 12 alphanumeric characters including spaces.
1. Select [System Administrator
Password] on the [System
Administrator Settings] screen.
2. Enter a new System
Administrator Password.

Fuji Xerox Document Centre 286 series Specifications

General

Brand	Fuji Xerox
Model	Document Centre 286 series
Category	All in One Printer
Language	English