Why is the Finisher/Stapler option missing on my Fuji Xerox Document Centre 336 All in One Printer?
If the Finisher/Stapler option is not displayed on your Fuji Xerox All in One Printer: * Check that the cables from the finisher are securely connected to the machine. * Slide the finisher into its correct position. * The machine configures itself when additional options are attached.
Why doesn't my Fuji Xerox Document Centre 336 display the Tandem Tray Module?
If your Fuji Xerox All in One Printer does not display the Tandem Tray Module (or one of the paper trays) as one of the Paper Supply selections: * Check that no paper trays are open. If a tray is ajar, the machine cannot sense its connection. * Open and close each paper tray and the Tandem Tray Module. If this does not rectify the problem, then power the machine off and then on.
How to correct washout issue on Fuji Xerox Document Centre 336 All in One Printer?
To correct a washout issue on your Fuji Xerox All in One Printer: * Check the quality of the documents. * If the image is lighter near the borders, select a darker image quality setting on the touch screen. * Replace the drum cartridge.
Why is my Fuji Xerox All in One Printer producing blank output?
If your Fuji Xerox All in One Printer is producing blank output, consider these possible solutions: * Check that the document is loaded face up in the document feeder. * If the drum cartridge is new, repeat the job as the toner may not be dispensed yet. * Check that the seal tape has been removed from the new drum cartridge. * Reinstall the drum cartridge and the toner cartridge. * Replace the drum cartridge. * If the screen displays a message for replacement, replace the toner cartridge.
How to resolve ghosting issues on Fuji Xerox Document Centre 336?
To resolve ghosting issues on your Fuji Xerox All in One Printer: * Check the quality of the documents. * If transparencies are used, select [Transparency] in [Paper Type]. * Feed the document SEF. * Replace the drum cartridge.
Why are characters missing from my Fuji Xerox Document Centre 336 All in One Printer output?
If characters are missing from your Fuji Xerox All in One Printer output: * Load fresh paper. * Reinstall the drum cartridge. * Replace the toner cartridge if the screen message for replacement is displayed.
Why is my Fuji Xerox Document Centre 336 producing uneven prints?
If your Fuji Xerox All in One Printer is producing uneven prints: * Replace the drum cartridge. * Replace the toner cartridge if the screen message for replacement is displayed.
Why are images blurred when printing from Fuji Xerox Document Centre 336?
If you are getting blurred images from your Fuji Xerox All in One Printer: * Load fresh paper. * Replace the drum cartridge. * Replace the toner cartridge if the screen message for replacement is displayed.
How to troubleshoot a tray fault on Fuji Xerox Document Centre 336 All in One Printer?
If your Fuji Xerox All in One Printer displays a tray fault: * Open the paper tray. * Move the paper tray guides away from the paper. * Move the paper tray guides against the paper so that they are just touching the paper. * Power the machine off and then on.
What to do if the document will not feed through Fuji Xerox Document Centre 336 document feeder?
If the document won't feed through the document feeder on your Fuji Xerox All in One Printer: * Check that the document feeder is not overloaded. The document feeder can hold a maximum of 50 sheets. * Check that the document is fully inserted into the document feeder.
General| Brand | Fuji Xerox |
|---|---|
| Model | Document Centre 336 series |
| Category | All in One Printer |
| Language | English |
Basic steps for making copies, including loading documents and starting the job.
Basic procedure for sending faxes and iFaxes.
Basic procedures for scanning documents.
Basic procedure for creating and executing job flows.
Features available when printing from a PC.
Allows sending jobs for printing or creating/changing job templates.
View and set machine properties like configuration and settings.
Information on how to load paper into each type of tray.
Basic procedure for accessing and customizing system settings.
Configure machine settings common to main features.
Specifies how reports are to be automatically printed.
Initializes hard disk or deletes all document data.
Checks job progress and displays detailed information.
Manages print jobs that failed authentication.
Stores confidential documents for printing, requiring user ID and password.
Prints one set of a document before printing the whole quantity.
Views machine status and tray/hard disk status.
Changes default printer mode and emulation settings.
Sets the fax reception mode to Manual or Auto.
Views billing meter info and specifies report output.
Views toner usage and cartridge status.
Outputs a report of recent errors.
Overview of the Authentication feature and user types.
Explains functions restricted by the Authentication feature.
Operation via network using CentreWare Internet Services.
Explains restrictions for job flow sheets and mailboxes.
Procedures for cleaning machine components.
Steps to replace the drum cartridge.
Steps to replace the toner cartridge.
Steps to load a new staple case into the finisher.
Steps to identify and clear faults.
Instructions for clearing paper jams in various locations.
Suggestions for resolving difficulties based on symptoms.
Lists fault codes and their corresponding remedies.
Details hardware configuration, size, and weight.
Details capacity, weight, and sizes for paper trays.
To Next Page