Error Code
547
Problem Solving
15
033-518
[Cause] The other machine cannot correspond to reception of SUB.
[Remedy] Check whether the other machine can correspond to reception of SUB, and execute the
operation again.
033-519
[Cause] The other machine cannot correspond to reception of SEP.
[Remedy] Check whether the other machine can correspond to reception of SEP, and execute the
operation again.
033-520
[Cause] The other machine cannot correspond to reception of PWD/SID.
[Remedy] Check whether the other machine can correspond to reception of PWD/SID, and
execute the operation again.
033-521
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the condition of the machine (memory is full, paper has run out, or other
conditions), and execute the operation again.
033-522
[Cause] An error occurred during fax transmission.
[Remedy] Ask the sender to execute the operation again.
033-523
[Cause] The line (Channel 1) is not connected correctly.
[Remedy] Confirm the connection of the line (Channel 1) and connect it correctly, and then
execute the operation again.
033-524
[Cause] The line (Channel 2) is not connected correctly.
[Remedy] Confirm the connection of the line (Channel 2) and connect it correctly, and then
execute the operation again.
033-525
[Cause] The line (Channel 3) is not connected correctly.
[Remedy] Confirm the connection of the line (Channel 3) and connect it correctly, and then
execute the operation again.
033-526
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the model of the sender's machine, and then execute the operation again. If
receiving, ask the sender to send again.
033-527
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the other machine has a problem, and then execute the operation again.
033-528
[Cause] An error occurred during fax transmission.
[Remedy] Ask the sender to send again.
033-529
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the other machine has a problem, and then execute the operation again.
033-530
[Cause] Received a procedure disabled signal.
[Remedy] Confirm the procedure for DTMF in the User Guide, and then execute the operation
again.
033-531
[Cause] Received a command rejection signal.
[Remedy] Confirm the condition of the other machine (memory is full, paper has run out, or other
conditions), and execute the operation again.
033-532
033-533
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If receiving, ask the sender to send again.
033-534
[Cause] The other machine does not offer a feature to print the number of document sets sent.
[Remedy] Do not specify multiple sets.
Error Code Cause and Remedy
To Next Page
Loading...
