Fuji Xerox DocuCentre-IV C5575

Specifications
621
Appendix
16
*1 : Based on when larger size paper is stacked on paper.
*2 : For the center binding/folding feature, Booklet Maker Unit for Finisher-B1 is required. After a job with center binding/folding
specified was output, remove the output paper from the tray to output the next job. In addition, when you print a job with
cente
*3 : For the Punching feature, US 2/3 Hole Punch Kit for Finisher-B1 or 2/4 Hole Punch Kit for Finisher-B1 is required.
 Finisher-C1 (optional)
Booklet Finishing*2 Capacity : 15 sheets (center binding), 5 sheets (folding)
Paper Size : Maximum: A3, 11 x 17",
Minimum: A4, 8.5 x 11"
Paper Weight : 64 - 80 gsm (center binding),
64 - 105 gsm (folding)
Important • When using 80 gsm paper
Dimensions/Weight Width 620 x Depth 552 x Height 987 mm, 28 kg
Width 620 x Depth 597 x Height 1,057 mm, 37 kg (When the Booklet
Maker Unit is attached)
Space Requirement (when
connected to the main
unit)
Width 1,666 x Depth 699 mm (Main unit + Finisher-B1, when the
extension tray and the bypass tray are fully extended)
Width 1,666 x Depth 699 mm (Main unit + Finisher-B1 + Booklet Maker
Unit, when the extension tray and the bypass tray are fully extended)
Type Output tray x 1 : Sorting/Stacking
Finisher tray x 1 : Sorting (Offset available)/
Stacking (Offset available)
Paper Size/Paper Weight Output tray
Maximum: 12.6 x 17.7", 12 x 19",
Minimum: B5, 55 - 220 gsm
Finisher tray
Maximum: 12.6 x 17.7", 12 x 19",
Minimum: B5, 55 - 220 gsm
Stacker Capacity Output tray 500 sheets (A4)
Finisher tray (For paper not stapled)
A4 : 3,000 sheets
B4 or larger : 1,500 sheets
Mixed stack* : 300 sheets
Finisher tray (For paper stapled)
A4 : 200 sets or 3,000 sheets
B4 or larger : 100 sets or 1,500 sheets
* : *Based on when larger size paper is stacked on paper.
Important • When using 80 gsm paper
Staple Capacity : 50 sheets (90 gsm or less)
Paper Size : Maximum: A3, 11 x 17", Minimum: B5
Position : 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using 80 gsm paper
Punch
Paper size : A3, 11 x 17", B4, A4, A4 , 8.5 x 11", 8.5 x 11" , B5
Number of Holes : 2/4 holes (Option: US 2/3 holes)
Paper Weight : 55 - 220 gsm
Important • When using 80 gsm paper
Dimensions/Weight Width 817 x Depth 639 x Height 1,058mm, 60 kg
Space Requirement (when
connected to the main
unit)
Width 1,863 x Depth 699 mm (Main unit + Finisher-C1, when the
extension tray and the bypass tray are fully extended)