5 Tools
142
Tools
5
Note • The paper size for Trays 3 and 4 is fixed to A4. For information about changing the paper size for
Trays 3 and 4, contact our Customer Support Center.
For more information, refer to "Supported Paper Type" (P.42).
z
Paper Color
Set the color of paper. The paper color selected here is displayed as the paper color on the
[Paper Supply] screen.
Customize Paper Supply Screen
Select whether or not the setting items specified in [Paper Size] under [Paper Tray
Attributes] are to be displayed on the [Paper Supply] screen.
îš„ Disabled
Does not display the items specified in [Paper Size].
îš„ Size Detection
Displays the setting in [Paper Size].
Paper Tray Attributes on Setup Screen
Select whether or not to display [Paper Tray Attributes] in the [Setup] screen.
This setting allows you to select the size and type of paper without entering the System
Administration mode.
Paper Tray Attributes During Loading
Select whether or not to display the [Paper Tray Attributes] screen after the tray is pulled out
or inserted in.
This setting applies to Trays 1 to 4 and 6 (optional) and 7 (optional). You cannot apply this
setting to Tray 5.
Paper Tray Priority
Set the priority of the trays to use when paper of the same size and the same orientation is
set in the multiple trays or print data does not include the paper tray information for
automatic tray selection.
Auto Paper selection means that a tray containing the appropriate paper is automatically
selected by the machine for copying or printing.
This setting applies to Trays 1 to 4 and 6 (optional), and 7 (optional). You cannot apply this
setting to Tray 5.
Note • When a logical printer is used and if you specify the paper tray with the print driver, this setting will
be ignored.
Paper Type Priority
Set the priority of the trays to use when paper of the same size and the same orientation is
set in the multiple trays for automatic tray selection.
Auto Paper selection means that a tray containing the appropriate paper is automatically
selected by the machine for copying or printing.
You can set plain paper, recycled paper, plain reload paper, and custom paper 1 to 5.
The paper type setting is prioritized over the paper tray priority settings.
If, however, different paper types appear in the same priority sequence, the paper is
determined by paper tray priority sequence. The tray containing paper type set to [Auto
Paper Off] is not selected by automatic tray selection.
For more information about the tray priority sequence, refer to "Paper Tray Priority" (P.142).
To Next Page
Loading...
Need help?
General
