15 Problem Solving
526
Problem Solving
15
033-517
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If the error still is not resolved, confirm the condition of the
other machine.
033-518
[Cause] The other machine cannot correspond to reception of SUB.
[Remedy] Check whether the other machine can correspond to reception of SUB, and execute the
operation again.
033-519
[Cause] The other machine cannot correspond to reception of SEP.
[Remedy] Check whether the other machine can correspond to reception of SEP, and execute the
operation again.
033-520
[Cause] The other machine cannot correspond to reception of PWD/SID.
[Remedy] Check whether the other machine can correspond to reception of PWD/SID, and
execute the operation again.
033-521
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the condition of the machine (memory is full, paper has run out, or other
conditions), and execute the operation again.
033-522
[Cause] An error occurred during fax transmission.
[Remedy] Ask the sender to execute the operation again.
033-523
[Cause] The line (Channel 1) is not connected correctly.
[Remedy] Confirm the connection of the line (Channel 1) and connect it correctly, and then
execute the operation again. When the machine is connected to other device such as a
home gateway and a terminal adapter, confirm whether the device works properly.
033-524
[Cause] The line (Channel 2) is not connected correctly.
[Remedy] Confirm the connection of the line (Channel 2) and connect it correctly, and then
execute the operation again. When the machine is connected to other device such as a
home gateway and a terminal adapter, confirm whether the device works properly.
033-525
[Cause] The line (Channel 3) is not connected correctly.
[Remedy] Confirm the connection of the line (Channel 3) and connect it correctly, and then
execute the operation again. When the machine is connected to other device such as a
home gateway and a terminal adapter, confirm whether the device works properly.
033-526
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the model of the sender's machine, and then execute the operation again. If
receiving, ask the sender to send again.
033-527
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the other machine has a problem, and then execute the operation again.
033-528
[Cause] An error occurred during fax transmission.
[Remedy] Ask the sender to send again.
033-529
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the other machine has a problem, and then execute the operation again.
033-530
[Cause] Received a procedure disabled signal.
[Remedy] Confirm the procedure for DTMF in the User Guide, and then execute the operation
again.
033-531
[Cause] Received a command rejection signal.
[Remedy] Confirm the condition of the other machine (memory is full, paper has run out, or other
conditions), and execute the operation again.
Error Code Cause and Remedy
To Next Page
Loading...
