Name: Fuji Xerox DocuCentre-V C5575
Brand: Fuji Xerox
Rating: 5 (1 reviews)

To Next Page

To Previous Page

3 Maintenance

100

Maintenance

Important • Do not touch the ink pad of the stamp cartridge. If it comes into contact with your skin, wash

immediately.

• Problems caused by using consumables not recommended by Fuji Xerox are not covered by the

maintenance service contract.

• Before using consumables, carefully read instructions and precautions on their packages.

Note • We recommend always keeping spare consumables/periodic replacement parts in stock.

• To order consumables, contact our Customer Support Center.

(Product Name: Stamp Replacement Kit, Product Code: F451)

1 Pull up the knob on the document feeder top

cover, and open the document feeder top cover

completely.

2 Pull up the lever to open the inner cover.

3 Stick the supplied pin into the old stamp

cartridge, and pull it straight out of the

machine.

Note • If only the sponge part of the stamp

cartridge is removed, make sure of removing

the bottom part of the cartridge.

4 Insert the new stamp cartridge.

5 Close the inner cover of the document feeder.

6 Close the left cover of the document feeder until it clicks into place, and confirm that there

is no space between the near or far side of the cover and the document feeder.

Lever

Other manuals for Fuji Xerox DocuCentre-V C5575

Questions and Answers:

Need help?

Do you have a question about the Fuji Xerox DocuCentre-V C5575 and is the answer not in the manual?

General