Fuji Xerox DocuCentre-V C5575 User Manual

System Settings Procedure
141
Tools
5
Step 3 Selecting [Tools]
1
Select [Tools] on the Services Home screen.
Note • When the Services Home screen is not
displayed on the touch screen, press the
<Services Home> button.
Step 4 Selecting a Setting Item on the [Tools] Screen
On the [Tools] screen, select a setting item to set.
For the settings that can be selected on the [Tools] screen, refer to "Tools Menu List" (P.144).
1 Select a tab to set.
System Settings
You can set or change the default values of each service.
 Common Service Settings
Allows you to configure the general settings of the machine.
For more information, refer to "Common Service Settings" (P.160).
 Copy Service Settings
Allows you to configure the copy service settings such as copy feature defaults, copy
operation control, and button indications.
For more information, refer to "Copy Service Settings" (P.205).
 Connectivity & Network Setup
Allows you to configure the network related settings such as ports and protocols.
For more information, refer to "Connectivity & Network Setup" (P.215).
 Print Service Settings
Allows you to configure the print service settings such as memory settings and print
operation control.
For more information, refer to "Print Service Settings" (P.244).
 Scan Service Settings
Allows you to configure the scan service settings such as scanner defaults and button
indications.
For more information, refer to "Scan Service Settings" (P.251).

Fuji Xerox DocuCentre-V C5575 Specifications

General

Print Resolution	1200 x 2400 dpi
Warm-up Time	30 seconds or less
Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Max Paper Size	A3
Print Speed	55 ppm (pages per minute)
Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Connectivity	Ethernet, USB
PDL	PCL6, PostScript 3
Copy Speed	55 ppm (A4), 55 ppm (Letter)
Fax Resolution	400 x 400 dpi