Fuji Xerox DocuCentre-V C5575 User Manual

9 Scanner Environment Settings
374
Scanner Environment Settings
9
Configuration of Network Scanning (Job Template Scanning)
This section describes how to configure the machine to use the Network Scanning service.
The following shows the reference section for each procedure.
Step 1 Preparations..................................................................................................................................................................... 374
Step 2 Enabling Ports and Setting up TCP/IP....................................................................................................................... 374
Step 3 Configuring the SNMP Port .......................................................................................................................................... 375
Step 4 Configuration on the Computer.................................................................................................................................. 375
Step 1 Preparations
The following environment is required to use the Network Scanning feature on the machine.

To use SMB forwarding, your computer must run on one of the following operating
systems that supports folder sharing.
- Microsoft Windows NT 4.0
- Microsoft Windows 2000
- Microsoft Windows Server 2003
- Microsoft Windows Server 2008
- Microsoft Windows Server 2008 R2
- Microsoft Windows Server 2012
- Microsoft Windows Server 2012 R2
- Microsoft Windows XP
- Microsoft Windows Vista
- Microsoft Windows 7
- Microsoft Windows 8
- Microsoft Windows 8.1
Step 2 Enabling Ports and Setting up TCP/IP
To use Network Scanning service, enable the port and set the IP address. The following
describes the configuration procedures on the machine.
Note • You can configure the settings using CentreWare Internet Services. For information on how to use
CentreWare Internet Services, refer to "Configuring Machine Settings Using CentreWare Internet
Services" (P.339).
1 Display the [Tools] screen.
1) Press the <Log In/Out> button.
2) Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's
passcode, and select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3) Select [Tools] on the Services Home screen.
2 Enable the SNMP port.
1) Select [Connectivity & Network Setup].

Fuji Xerox DocuCentre-V C5575 Specifications

General

Print Resolution	1200 x 2400 dpi
Warm-up Time	30 seconds or less
Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Max Paper Size	A3
Print Speed	55 ppm (pages per minute)
Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Connectivity	Ethernet, USB
PDL	PCL6, PostScript 3
Copy Speed	55 ppm (A4), 55 ppm (Letter)
Fax Resolution	400 x 400 dpi