Name: Fuji Xerox DocuCentre-V C5575
Brand: Fuji Xerox
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Replacing Consumables

101

Maintenance

Replacing Stamp (for Duplex Automatic Document Feeder B1-PC)

If the machine offers the Fax service and the Stamp Kit SP (optional) is installed, replace the

stamp cartridge when stamp impressions start to fade.

Important • Do not touch the ink pad of the stamp cartridge. If it comes into contact with your skin, wash

immediately.

• Problems caused by using consumables not recommended by Fuji Xerox are not covered by the

maintenance service contract.

• Before using consumables, carefully read instructions and precautions on their packages.

Note • We recommend always keeping spare consumables/periodic replacement parts in stock.

• To order consumables, contact our Customer Support Center.

(Product Name: Stamp Replacement Kit, Product Code: F451)

1 Lift the document feeder gently, and open the

Side 2 scanner.

2 Stick the supplied pin into the old stamp

cartridge, and pull it straight out of the

machine.

Note • If only the sponge part of the stamp

cartridge is removed, make sure of removing

the bottom part of the cartridge.

3 Insert the new stamp cartridge.

4 Close the Side 2 scanner, and then close the

document feeder gently.

Other manuals for Fuji Xerox DocuCentre-V C5575

Questions and Answers:

Need help?

Do you have a question about the Fuji Xerox DocuCentre-V C5575 and is the answer not in the manual?

General