Fuji Xerox DocuCentre-V C5575 User Manual

5 Tools
250
Tools
5
If you instruct the machine to print jobs of multiple documents continuously, the machine
may preferentially print a job which was sent later depending on the time for data
processing.
 Job Submission Order
Prints jobs in the order of lpr print submission.
Important • This setting is valid only when [Receiving Buffer - LPD] is set to [Spool to Hard Disk]. When any other
setting, printing is performed in [Data Processing Order].
OCR Font Glyphs (0 x 5C)
Allows you to select [Backslash] or [Japanese Yen Sign] to print 0x5C character when the
OCR fonts are used.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.

Fuji Xerox DocuCentre-V C5575 Specifications

General

Print Resolution	1200 x 2400 dpi
Warm-up Time	30 seconds or less
Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Max Paper Size	A3
Print Speed	55 ppm (pages per minute)
Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Connectivity	Ethernet, USB
PDL	PCL6, PostScript 3
Copy Speed	55 ppm (A4), 55 ppm (Letter)
Fax Resolution	400 x 400 dpi