Fuji Xerox DocuCentre-V C5575 User Manual

Error Code
579
Problem Solving
15
072-210
[Cause] Tray 2 malfunction
[Remedy] Confirm the paper loading condition for the Tray 2, and then switch off the machine
power, make sure that the touch screen is blank, and then switch on the machine power.
If the error still is not resolved, contact our Customer Support Center. You can use a tray
other than Tray 2.
072-212
[Cause] Tray 2 malfunctioned
[Remedy] Contact our Customer Support Center. You can use a tray other than Tray 2.
073-210
[Cause] Tray 3 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then switch off the machine
power, make sure that the touch screen is blank, and then switch on the machine power.
If the error still is not resolved, contact our Customer Support Center. You can use a tray
other than Tray 3.
073-212
[Cause] Tray 3 malfunction
[Remedy] Contact our Customer Support Center. You can use a tray other than Tray 3.
074-210
[Cause] Tray 4 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then switch off the machine
power, make sure that the touch screen is blank, and then switch on the machine power.
If the error still is not resolved, contact our Customer Support Center. You can use a tray
other than Tray 4.
074-212
[Cause] Tray 4 malfunction
[Remedy] Contact our Customer Support Center. You can use a tray other than Tray 4.
075-212
[Cause] Tray 5 malfunction
[Remedy] Contact our Customer Support Center. You can use a tray other than Tray 5.
077-211
077-212
[Cause] Detected the installation of a tray of a different type than expected.
[Remedy] Contact our Customer Support Center.
077-214
077-215
[Cause] Detected the installation of a tray of a different type than expected.
[Remedy] Contact our Customer Support Center.
077-314
077-320
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
078-216
078-219
[Cause] An error occurred in Tray 6 (HCF B1) (optional).
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
078-250
[Cause] An error occurred in Tray 6 (HCF B1) (optional).
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
078-500
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
Error Code Cause and Remedy

Fuji Xerox DocuCentre-V C5575 Specifications

General

Print Resolution	1200 x 2400 dpi
Warm-up Time	30 seconds or less
Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Max Paper Size	A3
Print Speed	55 ppm (pages per minute)
Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Connectivity	Ethernet, USB
PDL	PCL6, PostScript 3
Copy Speed	55 ppm (A4), 55 ppm (Letter)
Fax Resolution	400 x 400 dpi