Document Jams
617
Problem Solving
15
2 If the document is not caught in the entry of
the document feeder, pull out the document.
3 If the massage on the screen instructs you to
turn the knob, turn the knob to eject the
document upwards.
Important • If the document is caught, do not pull it out
forcibly. The document could be damaged.
4 Close the left cover of the document feeder until it clicks into place, and confirm that there
is no space between the near or far side of the cover and the document feeder.
5 If you cannot find the document, lift the
document feeder gently, open the Side 2
scanner and remove the document if it is there.
6 Return the Side 2 scanner first, and then close
the document feeder gently.
7 If you could not find the document in step 5,
lift the document feeder tray and remove the
document.
8 Return the document feeder tray gently.
9 Make sure that the document is not torn, wrinkled or folded, and then load the document
again following the instructions displayed on the touch screen.
To Next Page
Loading...
Need help?
General
