Fuji Xerox DocuCentre-V C5575 User Manual

16 Appendix
696
Appendix
16
Binding 217 Sets binding when printing 2 sided.
You can select [LEF] or [SEF] for 2 sided printing. Select according to the edge to
be bound. Unifies the leading direction of the image on the front and rear sides
of the paper at the long edge of the paper for LEF and at the short edge of the
paper for SEF.
[0] (Default) : LEF
[1] : SEF
Line termination 218 Sets line termination processing.
[0] (Default) : Off
[1] : Add-LF (Appends an LF to CR)
[2] : Add-CR (Appends a CR to LF and FF)
[3] : CR-XX (Appends a CR to LF and FF, and LF to CR)
Default custom
paper size
219
(Short
edge)
Specifies the default custom paper size.
[2100] (Default short-edge value) : 210.0 mm
[2970] (Default long-edge value) : 297.0 mm
[0] - [9999] : 0 to 999.9 mm
220
(Long
edge)
Print Quantity
Setup
221 Sets the method for specifying the number of copies to print.
[0] : Protocol
[1] : Panel
[2] (Default) : Command
Parameter Item No. Value

Fuji Xerox DocuCentre-V C5575 Specifications

General

Print Resolution	1200 x 2400 dpi
Warm-up Time	30 seconds or less
Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Max Paper Size	A3
Print Speed	55 ppm (pages per minute)
Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Connectivity	Ethernet, USB
PDL	PCL6, PostScript 3
Copy Speed	55 ppm (A4), 55 ppm (Letter)
Fax Resolution	400 x 400 dpi