Activity Report
755
Appendix
16
Remote Station Information on recipient to which transmission is made is recorded
in the following order of priority.
Transmitting (speed dialing)
1. Recipient
2. Remote terminal name
3. G3 ID (including spaces)
4. Tel. No.
5. Communication mode EC (or G3, SG3)
When IP Fax (SIP) is used:
1. Recipient
2. Remote terminal name
3. G3 ID (including spaces)
4. SIP address
5. Communication mode IP Fax or IP Fax-ECM
Transmitting (when all digits are dialed)
1. Remote terminal name
2. G3 ID (including spaces)
3. Tel. No.
4. Communication mode EC (or G3, SG3)
When IP Fax (SIP) is used:
1. Remote terminal name
2. G3 ID (including spaces)
3. Tel. No.
4. SIP address
5. Communication mode IP Fax or IP Fax-ECM
Receiving
1. Remote terminal name
2. G3 ID (including spaces)
3. Communication mode EC (or G3, SG3)
When IP Fax (SIP) is used:
1. Remote terminal name
2. G3 ID (including spaces)
3. Communication mode IP Fax or IP Fax-ECM
Note • You can set the number of character digits displayed for the
recipient whether the first 40 digits or the last 40 digits. For
details on setting up, see "Activity Report - Recipient" (P.178).
The factory default displays the first 40 digits.
Start Time The date and time that the communication began are shown.
In Batch Send, the start time of the transmission for each
document is recorded.
Duration The duration of the transmission is displayed. In Batch Send, it is
the length of time taken to transmit each document is recorded.
Item Description
To Next Page
Loading...
Need help?
General
