3 Basic Operation
62
Basic Operation
3
Copying Procedure
This section describes the basic copy procedure. Before making copies on the machine,
confirm what is to be copied and the number of copies required. Follow the steps below.
Step 1 Loading Documents..........................................................................................................................................................62
Step 2 Selecting Features.............................................................................................................................................................64
Step 3 Entering a Quantity...........................................................................................................................................................65
Step 4 Starting the Copy Job .......................................................................................................................................................65
Step 5 Confirming the Copy Job in Job Status ........................................................................................................................66
Step 1 Loading Documents
The following two methods are available to load documents:
Document Feeder
z
Single sheet
z
Multiple sheets
Document Glass
z
Single sheet
z
Bound documents, such as books
Document Feeder
The document feeder supports single and multiple sheet documents with sizes from 125 x
85 mm (Standard size: A5, A5 ) to 297 x 432 mm (Standard size: A3, 11 x 17").
Note • When Duplex Automatic Document Feeder C1-PC is installed, the minimum supported size for the
original document is 84 x 139.7 mm (Standard size: A6).
• The document feeder is optional for some models. For more information, contact our customer
support center.
The document feeder automatically detects standard size documents. For non-standard size
documents, enter the size on the [Original Size] screen.
The document feeder accepts the following number of sheets.
Important •To avoid paper jams, use the document glass for folded or wrinkled documents, cut-and-pasted
documents, curled paper, or back carbon paper.
• The lightweight paper of 38 - 49 gsm cannot be scanned 2 sided.
1
Remove any paper clips and staples before loading a document.
Document Type (Weight)
Number of Sheets
Duplex Automatic
Document Feeder
B1-PC
Duplex Automatic
Document Feeder
C1-PC
Lightweight paper (38 - 49 gsm) 130 sheets 250 sheets
Plain paper (50 - 80 gsm) 130 sheets 250 sheets
Heavyweight paper (81 - 128 gsm) 85 sheets 150 sheets
Heavyweight paper (129 - 200 gsm) - 100 sheets