Fuji Xerox DocuCentreS2320 User Manual

12 Problem Solving
200
Problem Solving
12
The printout is
faint overall.
When using the Tray 5
(bypass) to print, the paper
size specified in the print
driver does not match the
type and size of the paper
actually loaded.
Load paper of the correct type and size in the
Tray 5 (bypass).
Refer to "Loading Paper in Tray 5 (bypass)" (P.88).
Multiple pages were fed
through the machine at once.
Riffle through the stack of paper thoroughly
before loading it.
The paper is
wrinkled.
The paper is unsuitable. Replace the paper with new paper.
Paper has been added to the
paper loaded.
The paper is damp.
Text is blurry. The paper is unsuitable. Replace the paper with new paper.
Paper has been added to the
paper loaded.
The paper is damp.
White or color
patches appear
vertically.
Paper feed
direction
The drum cartridge has
deteriorated or been
damaged.
Replace the drum cartridge with a new one.
Refer to "Replacing the Drum Cartridge" (P.182).
The toner cartridge has run
out of toner.
Replace the toner cartridge with a new one.
Refer to "Replacing the Toner Cartridge" (P.179).
The printout is
slanted.
The paper cassette's paper
guides are not aligned to the
correct position.
Align the horizontal and vertical paper guides
properly.
Refer to "Loading Paper in Trays 1 to 4 (Optional)"
(P.87).
Refer to "Loading Paper in Tray 5 (bypass)" (P.88).
Symptom Possible Cause Remedy

Fuji Xerox DocuCentreS2320 Specifications

General

Brand	Fuji Xerox
Model	DocuCentreS2320
Category	Printer
Language	English