48 4 Printing
5. Select [Transparency] from [Paper Type for Bypass Tray] and click [OK]. If necessary,
select the [Insert Paper between Transparencies] check box to separate output
transparencies with blank paper.
6. Select the [Basic] tab, and then select the size of the original document from [Paper
Size].
7. From [Output Size], select the size of the transparencies.
Note
• If the output size is the same as the document size, you can also select [Same as Paper Size].
8. Click [Poster /Mixed Document /Rotation 180deg] to select the correct orientation from
[Image Rotation (180deg)], and then click [OK].
9. Click [OK].
10. On the [Print] dialog box, click [Print] to start printing.
5
6
6
7
To Next Page
Loading...
