ix
Locate this product in a well-ventilated area. Do not obstruct ventilation openings of the product.
Keep the minimum clearance as follows for ventilation and an access to the power plug. Unplug the product
if an abnormal condition is noted.
Do not incline the product at more than 10 degree angle. Otherwise, it may fall over and cause injuries.
To bundle wires and cables, always use the cable ties and spiral tubes that Fuji Xerox supplies. Otherwise,
it may cause some defects.
100 mm
100 mm
100 mm
662 mm
662 mm
540 mm
464 mm
200 mm
200 mm
100 mm
100 mm
Left
Left
Right
Right
Front
Front
Back
Back
10°
10°
10°
10°
To Next Page
Loading...
