Troubleshooting and other information
53
A
Paper jams A
Do not attempt to remove a paper jammed deeply inside the product, particularly a paper wrapped around
a heat roller. Otherwise, it may cause injuries or burns, and even worse, may generate smoke if you keep
operating the product with a paper jammed.
Switch off the product promptly and contact your local Fuji Xerox representative for more information.
If a paper jam occurs inside the machine or the paper tray, the Error LED ( ) will blink twice.
a Leave the machine turned on for 15 minutes for the product to cool down before you touch the internal
parts of the product.
b Use both hands to slowly pull out the jammed paper.
c Open the top cover.
To Next Page
Loading...
Need help?
General
