7
Copy
Fitting the image to a fixed copy size
1
Select [Copy].
2
Select [Auto%] for [Reduce/Enlarge]
and select the desired standard size for
[Media Supply].
When the desired standard size is not
listed, select [More].
3
Select the desired standard size for
[Standard Size], and select [Close].
4
Enter the number of copies (1 to 99)
using the numeric keypad.
5
Set the document in portrait orientation.
Align the document face down with the document guide.
The document will be scanned automatically, and copied.
● By selecting the desired copy size, you can easily make copies with scaling.
Document
Media
Various sized documents
Media
A0
A1
A0
A1
A4
A4
Menu
Copy
Scan
Stored
Programming
Setup Menu
Language
Job Status
Machine Status
Log In/Out
Clear All
Interrupt
Start
Stop
Transmitting
Copy Scan Menu
Job in memory
Copy from
Memory
Power Saver
2 ISO A2
1 ISO A0
50.0%
A0
Auto R/E
More...
More...
Bond
Bond
Auto
Select
Auto%
100.0% Bond
Media SupplyReduce/Enlarge Media Type
Vellum
Film
Media Cut Mode
Basic
Copy
Image
Quality
More
Features
-
A2>
ISO A0
Media Supply
Cancel Close
Auto
Select
Standard
Size
Media
Source
ISO A1
ISO A2
ISO A3
ISO A4
JIS B1
JIS B2
JIS B3
JIS B4
8.5 x 11"
9 x 12"
11 x 17"
Note
If you select the [Auto R/E] check box, you can
copy according to setting determined in
advance. Refer to User Guide P.59.
Note
Trays can be specified instead of media size.
Refer to User Guide P.58.
Note
• The standard size document can be placed in
landscape orientation.
• Press to stop copying.
Stop
To Next Page
Loading...
Need help?
General
