102
1
1. Quit all applications (FinePixViewer etc.)
that are using the camera.
2. Check that the indicator lamp is lit green
or that the self timer lamp is off (no data is
being exchanged with the computer).
Perform the steps shown below before you
switch the camera off. This procedure
differs depending on the operating system
software (or PC) you are using.
No PC operation is needed.
2. Left-click the Eject icon in the taskbar and
eject “USB Disk”.
✽ Even when “Copying” is no longer displayed on the
computer, the camera and the computer may still be
exchanging data. Always check that the indicator
lamp is lit green or that the self timer lamp is off.
Windows 98 or 98 SE
Windows Me/2000 Professional/XP
2
For a DSC connection, proceed to step .
For a PC CAM connection, proceed to step .
3
2
1. Right-click the
removable disk icon in
the “My Computer”
window and select
Eject. This step is only
required in Windows
Me.
✽ Screen for Windows Me
7.4 Disconnecting the Camera
To Next Page
Loading...
Need help?
General
