9 First Steps
Charging the Battery
3
Plug the charger in.
Plug the charger into an indoor power outlet. The charging indicator will
light.
The Charging Indicator
The charging indicator shows battery charge status as follows:
Charging indicator
Battery status
Action
O
Battery not inserted.
Insert the battery.
Battery fully charged.
Remove the battery.
On
Battery charging.
—
Blinks
Battery fault.
Unplug the charger and remove the battery.
Unplug the charger and remove the battery.
4
Charge the battery.
Remove the battery when charging is complete. See the speci cations
(P 124) for charging times (note that charging times increase both at high
temperatures and at low temperatures).
Q Unplug the charger when it is not in use.