103
Menus
The Setup Menu
Blink Detection (pg. 32)
At settings other than OFF, a warning will be dis-
played if the camera detects subjects who may have
blinked when the picture was taken. If ZOOM (CON-
TINUOUS) is selected, you can view these subjects
using zoom.
B
FRAME NO.
New pictures are stored in
image files named using a
four-digit file number as-
signed by adding one to the
last file number used. The
file number is displayed dur-
ing playback as shown at right.
B
FRAME NO.
controls whether file numbering is reset to 0001
when a new memory card is inserted or the cur-
rent memory card is formatted.
• CONTINUOUS: Numbering continues from the last
file number used or the first available file num-
ber, whichever is higher. Choose this option to
reduce the number of pictures with duplicate
file names.
• RENEW: Numbering is reset to 0001 after format-
ting or when a new memory card is inserted.
1 Notes
• If the frame number reaches 999-9999, the shutter
release will be disabled (pg. 117).
•
Selecting R RESET (pg. 99) resets B FRAME NO. to
CONTINUOUS but does not reset frame numbering.
• Frame numbers for pictures taken with other cam-
eras may differ.
100-0001
Frame number
File
number
Directory
number
100-0001
Frame number
File
number
Directory
number
To Next Page
Loading...
Need help?
General
