To Next PageTo Next Page
Need help?Do you have a question about the FujiFilm Frontier 570 and is the answer not in the manual?
Explains the manual's purpose, scope, and precautions for use.
Lists other manuals for DI Print/Data Writing and DI File Import/Export Software.
Defines safety categories like WARNING, CAUTION, IMPORTANT, and NOTE for user guidance.
Provides general safety guidelines for machine operation and maintenance.
Details crucial safety measures to avoid electric shock from high voltage sources.
Specifies optimal temperature, humidity, and illumination levels for equipment performance.
Lists precautions to prevent damage to the FMPC system unit.
Shows system diagrams for FMPC connected with FRONTIER 355/375/570 and 350/370.
Lists recommended hardware specifications for the FMPC, including model, CPU, memory, and OS.
Explains the elements and functions of the FMPC Main Menu screen.
Describes the "Next Print" list, "Done" list, status display, and control buttons.
Details the selected frame, function buttons, title bar, and status bar on the SP3000 screen.
Describes the components of the SP1500/2000 printing screen, including menus and status indicators.
Details the step-by-step procedure for starting up the complete digital minilab system.
Guides users through the essential pre-operational checks within the FMPC interface.
Instructions for cleaning the mirror box using a blower brush.
Steps for cleaning the NC240Y auto film carrier, including sensors and guides.
Detailed steps for cleaning the NC135Y auto film carrier, including dust removal.
Outlines the procedure to perform automatic scanner correction for consistent print quality.
Instructions for cleaning the diffusion box and LED board cover to prevent print defects.
Steps to clean the NC100AY auto film carrier, focusing on the film feed section.
Procedure for performing scanner correction on FRONTIER 355/375/570 models.
Explains how to select paper magazines (Auto, Upper, Lower) based on print size and type.
Outlines the overall workflow for printing, including important notes.
Provides a step-by-step guide for performing DSC printing using the Imaging Controller.
Details the film loading, image scanning, and printing process for FRONTIER 350/370.
Explains actions for the W-8102 error when paper types/magazines mismatch.
Describes how to handle W-1627 errors related to magazine surface or emulsion mismatch.
Details precautions and limitations when connecting and using the PU800B.
Illustrates the sequence of steps for shutting down the entire digital minilab system.
Outlines post-operational checks and shutdown steps for FRONTIER 350/370.
Steps for cleaning the NC100AY auto film carrier as part of shutdown.
Instructions for cleaning the exterior of the machine as part of the shutdown process.
Guides on recording daily processing data and clearing it for system maintenance.
Detailed steps for performing post-operational checks and shutting down the FMPC.
Provides instructions for safely shutting down the Imaging Controller computer.
Procedure for initiating an emergency stop and powering off the FMPC.
Steps to perform an emergency shutdown of the FRONTIER scanner (SP).
Instructions for manually shutting off printer power in case of emergencies.
Guides users on how to return the FRONTIER 350/370 to a direct-connecting type.
Details the process to revert FRONTIER 355/375/570 to a direct-connecting type.
Explains how to access and navigate the operator menu for setup and maintenance.
Describes how to view and manage production information, including clearing data.
Step-by-step guide for setting up new paper conditions, including upkeep printing and measurement.
Instructions for checking and verifying the temperature of processing solutions.
Detailed procedure for processing control strips to evaluate solution performance.
Guides on setting up DIC order back printing functionality.
Procedure for measuring and setting the output of replenisher pumps.
Steps for measuring and setting the output of auto-cleaning pumps.
Process for calibrating the temperature of processor section solutions.
Instructions for checking the status of various sensors within the processor.
How to set and configure the operating conditions for the processor.
Explains how to access and navigate the operator menu for setup and maintenance on FRONTIER 570.
Details managing production information for FRONTIER 570, including data saving and clearing.
Steps for setting up new paper conditions, including printing and measuring.
Configuration steps for DIC order back printing.
Procedure for registering paper magazines used by the printer.
Adjusting paper feed length when a new magazine is registered.
Procedure for setting the optimal temperature for the G laser (SHG).
Instructions for checking the status of various sensors within the printer.
How to fine-tune image position and tilt on prints based on magazine and feed length.
Setting printer functions, including magazine operation and distribution unit adjustment.
Procedure to measure and set the output of the PSR replenisher pump.
Confirming the discharging process of the auto cleaning pump.
Setting up automatic water replenishment when printing volume is low.
Calibrating temperatures of solutions in the processing tanks.
Checking the status of various sensors within the processor.
Setting the operating conditions for the processor.
Error related to magazine installation or paper end processing, requiring magazine check.
Indicates post-operational check cannot start due to ongoing paper processing.
Communication error during image sending from FMPC to printer, requiring inspection.
Error due to paper width mismatch with magazine, suggesting magazine replacement.
Error when paper type and magazine mismatch, requiring magazine exchange.
Error indicating the selected magazine does not exist, requiring replacement.
General